How about an update....OK, here we go!
Still working on bits and pieces at the back of the car, so only 2 rear wheels done. Decided to spray paint them with automotive aluminum paint.
Here's how it looks
![[Image: 14052010.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/14052010.jpg)
time to cut some tread
![[Image: 15052010.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/15052010.jpg)
one tire done, looking good, endless amount of hand cut tread grooves cut in one tire :8ball:
![[Image: 15052011.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/15052011.jpg)
both rear tire treads done
![[Image: 15052012.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/15052012.jpg)
in order to keep going with rear suspension bits, wheel alignment etc, making 2 brackets that will keep chassis in place under car body
![[Image: 18052010.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052010.jpg)
decided to DMC it
![[Image: 18052011.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052011.jpg)
carved, painted, lacquer coated, polished, screwed on
![[Image: 18052012.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052012.jpg)
and second bracket/badge -WCC [Wooden Custom Cars]
![[Image: 18052014.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052014.jpg)
looking good
![[Image: 18052015.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052015.jpg)
made a pair of spacers that I hope will work well as disc brake imitation
![[Image: 18052016.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052016.jpg)
last look at this pair as they will get lick of fresh rubber imitation
![[Image: 18052017.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052017.jpg)
can't believe it turned out that good :jawdrop:
![[Image: 18052020.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052020.jpg)
and here's few bits done for rear suspension that was done somewhere in start of this post
![[Image: 15052014.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/15052014.jpg)
piece of Guinness goes into rear axle
![[Image: 18052022.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052022.jpg)
so aluminum from can wrapped around and dead glued
![[Image: 18052023.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052023.jpg)
this will be glued on to axle on both sides as spacer/controller so the axle stays in middle position and be able to turn around
![[Image: 18052025.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052025.jpg)
now this is how it all has turned out so far, some parts are painted in different colors - black, blue, aluminum
![[Image: 18052027.jpg]](http://i56.servimg.com/u/f56/17/82/32/09/18052027.jpg)
next week, will try to finish up wit rear of the chassis and front, stay tuned