27 Mar 2008, 16:51
Hi,
As part of a winter re-build, I renewed the front discs trying to cure a bit of steering wheel vibration (as well as wheel bearings/poly bushings Etc) Anyway this did not work. so in the end I had to replace both the hubs (as advised but did not check, sorry Nick :oops: ) anyway I replaced the discs again just in case. So I have a set of front discs that have covered about 20 miles, I'm 98% sure there perfect, however I decided to put new ones on again just in case :? So if any one wants the old ones to try (indeed the hubs if any one has a use for a bit of scrap) then your welcome to have them to try. FOC, Collection ideally.
Chris
As part of a winter re-build, I renewed the front discs trying to cure a bit of steering wheel vibration (as well as wheel bearings/poly bushings Etc) Anyway this did not work. so in the end I had to replace both the hubs (as advised but did not check, sorry Nick :oops: ) anyway I replaced the discs again just in case. So I have a set of front discs that have covered about 20 miles, I'm 98% sure there perfect, however I decided to put new ones on again just in case :? So if any one wants the old ones to try (indeed the hubs if any one has a use for a bit of scrap) then your welcome to have them to try. FOC, Collection ideally.
Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584