+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2)
+--- Forum: General Discussions on the DOC / Car / Company / JZD (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Rear license plate bezel (/showthread.php?tid=4633)
Rear license plate bezel - wythet - 16 Aug 2014
Hi!
Its been a while since I posted.
I'm having trouble figuring out how to remove the rear license plate bezel (the after market aluminium one with no screw holes).
Any thoughts anyone?
#10646 is now in Australia by the way! Just need to put some local plates on and away we go! We had a full chassis restore before shipping it over as well, Courtesy of Martin G.
Re: Rear license plate bezel - Rich Hanlon - 16 Aug 2014
If its one of James RG's ones for European-shape numberplates, the method is to remove the two rear light clusters and reach inside where you will find two nuts on each side of the bezel which are on studs which are part of the bezel and poke through the original holes in the fascia.
Re: Rear license plate bezel - JamesRGUK - 17 Aug 2014
http://homepage.ntlworld.com/james.grant793/fitting.pdf
Should make it easier to understand
James
Re: Rear license plate bezel - Dangermouse - 18 Aug 2014
So NI-US west coast - US East Coast-England-Australia ? A well travelled car
Re: Rear license plate bezel - wythet - 30 Sep 2014
Great, thanks everyone.
All registered and back on the road after a good clean! Has to replace seat belt buckles with Australian compliant ones but no other conversion required thankfully.
Its certainly been a hell of a Journey!